1
2
3
4
5

Introduction of many types of knobs

2021-01-17

Both of them are plum knobs, one with a nut at the bottom and the other with a screw at the bottom. These knobs are designed for sanitary environments and are commonly used in pharmaceutical and food processing facilities. Install them on the studs to locate, tighten and fix the equipment. Available in two materials: aluminum alloy and stainless steel, and the surface treatment is matte frosted finish; the assembly method has standard H7 reamed blind holes, threaded through holes and threaded blind holes. Stainless steel has good corrosion resistance and can be used under special sanitary, climatic and environmental conditions or in environments where the use of corrosion-resistant materials is mandatory by law; their edges are highly polished and have rounded edges, no horizontal ledges, and no gaps. Bacteria cannot grow. Therefore, it is widely used in chemical, food equipment and testing instruments.

Both are three star nut knob, one is a nut at the bottom, and the other is a screw at the bottom. These knobs are designed for sanitary environments and are commonly used in pharmaceutical and food processing facilities. Install them on the studs to locate, tighten and fix the equipment. Available in two materials: aluminum alloy and stainless steel, and the surface treatment is matte frosted finish; the assembly method has standard H7 reamed blind holes, threaded through holes and threaded blind holes. Stainless steel has good corrosion resistance and can be used under special sanitary, climatic and environmental conditions or in environments where the use of corrosion-resistant materials is mandatory by law; their edges are highly polished and have rounded edges, no horizontal ledges, and no gaps. Bacteria cannot grow. Therefore, it is widely used in chemical, food equipment and testing instruments.

These different types of knobs are all made of polyamide (PA), one with a galvanized screw at the bottom, and one with a threaded blind hole at the bottom. These knobs can be installed in the threaded hole; oil, grease and solvent resistant, black , Matte finish. The rubber coating provides a comfortable gripping position, which is convenient for tightening and holding the fixture. Therefore, it is widely used in chemicals, food, equipment and testing instruments.

This double-wing nut knob is made of polyamide (PA), one with a galvanized screw at the bottom and a threaded through hole at the bottom. These knobs can be installed in the threaded hole; oil, grease and solvent resistant, black, matt Light finish. The butterfly-shaped part of the knob is slightly concave, which is helpful for the fingers to hold and locate, and is helpful for fastening. The cap can be removed and used. Therefore, it is widely used in kitchenware, bathroom, entertainment, machinery and other facilities.

These spherical knobs are made of phenolic-based (PF) thermosetting material, resistant to chemical solvents, oil stains, strong gloss, beautiful appearance, high mechanical strength, sturdiness and durability; black and red are available, with inserts (copper material) and without inserts Pieces are optional. These traditional, easy-to-hold spherical knobs are installed on threaded studs, which are suitable for the use of various mechanical operating rods and push-pull rods.





CONTACT US
24-hour service
+86-18953529865
sales@tanja.com.cn